The overall signal flow of the synthesis engine is illustrated in the following diagram. For a more detailed version click here.
The links below provide further information about particular components. (You can access the same subpages by clicking in the blue frames in the diagram).
Envelopes | Oscillators | Shapers | Comb Filter | State Variable Filter | Feedback Mixer | Output Mixer | Flanger | Cabinet | Gap Filter | Echo | Reverb | Main Parameter Groups and Post Processing
Two Oscillators and Shapers produce signals which are passed to the Comb Filter, to the State Variable Filter, and to the Output Mixer. The filter output signals are also connected to this mixer. The resulting mix is passed to the effect section and finally to the output. A second mix from the filters and effects is defined for the Feedback bus.
There is a symmetric approach for the Oscillators, Shapers and Envelopes. Envelope A, Oscillator A and Shaper A (also called branch A
) are quasi-identical to Envelope B, Oscillator B and Shaper B (branch B
). Envelope C can be mapped to the filters, pitches, and feedback amounts.