List of Pedal Presets

Name/Type Remarks
Pot, Tip-Active
Continuous		 Generic 3-Wire Expression/Damper Pedal, Tip-Active (Roland pin-out). If there is a min control, set it fully counter-clockwise.
If there is a range control, set it fully clockwise.
Auto-Ranging dead-zones: 5%, 5%. Auto-Hold strength: medium.
Pot, Ring-Active
Continuous		 Generic 3-Wire Expression/Damper Pedal, Ring-Active (Yamaha pin-out). If there is a min control, set it fully counter-clockwise.
If there is a range control, set it fully clockwise.
Auto-Ranging dead-zones: 5%, 5%. Auto-Hold strength: medium.
Pot, Tip-Act. Rev.
Continuous		 Generic 3-Wire Expression/Damper Pedal, Tip-Active (Roland pin-out). Reversed output vs. pedal travel.
If there is a min control, set it fully counter-clockwise.
If there is a range control, set it fully clockwise.
Auto-Ranging dead-zones: 5%, 5%. Auto-Hold strength: medium.
Pot, Ring-Act. Rev.
Continuous		 Generic 3-Wire Expression/Damper Pedal, Ring-Active (Yamaha pin-out). Reversed output vs. pedal travel.
If there is a min control, set it fully counter-clockwise.
If there is a range control, set it fully clockwise.
Auto-Ranging dead-zones: 5%, 5%. Auto-Hold strength: medium.
Resistor
Continuous		 Generic 2-Wire Adjustable Resistor, Tip-Active.
Auto-Ranging dead-zones: 5%, 5%. Auto-Hold strength: medium.
Resistor, Rev.
Continuous		 Generic 2-Wire Adjustable Resistor, Tip-Active.
Reversed output vs. pedal travel.
Auto-Ranging dead-zones: 5%, 5%. Auto-Hold strength: medium.
Switch, Closing
Bi-Stable		 Generic 2-Wire Switch, Tip-Active.
100% Output in closed position.
Auto-Ranging dead-zones: 1%, 1%. Auto-Hold strength: weak.
You can use most tip-active expression and damper pedals as switches, too.
Switch, Opening
Bi-Stable		 Generic 2-Wire Switch, Tip-Active.
100% Output in closed position.
Auto-Ranging dead-zones: 1%, 1%. Auto-Hold strength: weak.
You can use most tip-active expression and damper pedals as switches, too.
CV, 0...5V
Continuous		 Control Voltage, Tip-Active, Fixed Range: 0...5V. Auto-Ranging: off, Auto-Hold strength: weak.
Do not apply voltages outside a 0...5V range. Do not apply ANY voltage when the unit is off.
CV, 0...5V
(Auto-Range)
Continuous		 Control Voltage, Tip-Active, Auto-Ranging within 0...5V. Auto-Ranging dead-zones: 1%, 1%. Auto-Hold strength: weak. Do not apply voltages outside a 0...5V range.
Do not apply ANY voltage when the unit is off.
— OFF — Use this to fully ignore a pedal even when connected.
E:Boss EV-30
Continuous		 3-Wire Expression Pedal, Tip-Active.
Set min controls to fully counter-clockwise.
For direct reverse action, use output EXP2 set to INV. Auto-Ranging dead-zones: 1%, 2%. Auto-Hold strength: medium.
E:Boss FV-500L
Continuous		 3-Wire Expression Pedal, Tip-Active.
Set min control to fully counter-clockwise.
Use EXP output.
Auto-Ranging dead-zones: 1%, 1%. Auto-Hold strength: strong.
E:Doepfer FP5
Continuous		 3-Wire Expression Pedal, Ring-Active.
Auto-Ranging dead-zones: 1%, 4%. Auto-Hold strength: medium.
E:Fractal EV-2
Continuous		 3-Wire Expression Pedal, Tip-Active.
Use EXP output.
Auto-Ranging dead-zones: 1%, 1%. Auto-Hold strength: weak.
D:Korg DS-1H
Continuous		 2-Wire (Resistor) Damper Pedal, Tip-Active, Reverse Action.
Auto-Ranging dead-zones: 3%, 7%. Auto-Hold strength: weak.
E:Korg EXP-2
Continuous		 3-Wire Expression Pedal, Ring-Active.
Use output 2.
Auto-Ranging dead-zones: 6%, 2%. Auto-Hold strength: medium.
E:Lead Foot LFX-1
Continuous		 3-Wire Expression Pedal, Tip-Active.
Auto-Ranging dead-zones: 1%, 1%. Auto-Hold strength: weak.
E:M-Audio EX-P (M.)
Continuous		 3-Wire Expression Pedal, Tip-Active.
Set min control to fully counter-clockwise.
Set bottom switch to M-Audio.
Auto-Ranging dead-zones: 1%, 1%. Auto-Hold strength: weak.
E:Moog EP-3 (std.)
Continuous		 3-Wire Expression Pedal, Tip-Active.
Set range control to fully clockwise.
Set bottom switch to Standard.
Auto-Ranging dead-zones: 1%, 8%. Auto-Hold strength: strong.
D:Roland DP-10
(cont.)
Continuous		 3-Wire Damper Pedal, Tip-Active.
Set switch to Continuous.
Auto-Ranging dead-zones: 7%, 1%. Auto-Hold strength: weak.
E:Roland EV-5
Continuous		 3-Wire Expression Pedal, Tip-Active.
Set min control to fully counter-clockwise.
Auto-Ranging dead-zones: 1%, 2%. Auto-Hold strength: weak.
D:Yamaha FC3A
Continuous		 3-Wire Damper Pedal, Ring-Active, Reverse Action.
Auto-Ranging dead-zones: 4%, 1%. Auto-Hold strength: weak.
E:Yamaha FC7
Continuous		 3-Wire Expression Pedal, Ring-Active.
Auto-Ranging dead-zones: 1%, 2%. Auto-Hold strength: strong.